Shouldered Bushes

Plastic Parts/Bushes: X-Lube®

X-Lube Bushes: Metric Shouldered

X-Lube® bushes use a superior nylon-6 material impregnated with molybdenum disulphide (MoS2). This additive lowers friction which helps to reduce the need for lubrication and increases the life of the bush.

Benefits

  • Self-lubricating
  • Low friction
  • Non-corrosive
  • Lightweight
  • Superior Chemical Resistance

Applications

  • Dry-running bearings
  • Hinges
  • Packers
  • Sleeves
  • Electrical Insulators
Clear
SKU: N/A Categories: ,

Product Codes

Part No. Product Inside Dia. Outside Dia. Overall Length Flange Dia. Flange Thickness Stocked
Code Millimeters Millimeters Millimeters Millimeters Millimeters
S 200M 742010B 4 8 22 10 2 Yes
S 80M 742030B 5 8 5 15 2 Yes
S 201M 742050B 5 10 22 13 2 Yes
S 201M 742050N 5 10 22 13 2 No
S 202M 742070B 6 10 22 13 2 Yes
S 48M 742110B 8 12 12 16 2 Yes
S 48M 742110N 8 12 12 16 2 No
S 205M 742090B 8 12 37 15 2 Yes
S 272M 742130B 8 12.5 12 18 2 Yes
S 55M 742150B 8 16 16 22 3 Yes
S 458M 742170B 10 14 28 28 2 Yes
S 260M 742190B 10 16 17 24 3 Yes
S 206M 742200B 10 16 22 20 2 Yes
S 206M 742200N 10 16 22 20 2 No
S 207M 742180B 10 16 37 20 2 Yes
S 338M 742210B 12 16 9 20 3 Yes
S 452M 742228B 12 16 16 26 1.5 Yes
S 208M 742220B 12 16 22 20 2 Yes
S 209M 742230B 12 16 37 20 2 Yes
S 179M 742238B 12 20 23 40 3 Yes
S 179M 742238N 12 20 23 40 3 No
S 299M 742221B 12 22 29 26 15 Yes
S 210M 742260B 16 20 22 26 2 Yes
S 211M 742250B 16 20 37 26 2 Yes
S 211M 742250N 16 20 37 26 2 No
S 312M 742270B 20 23 25 28 2 Yes
S 212M 742290B 20 25 22 32 2 Yes
S 213M 742280B 20 25 37 32 2 Yes
S 62M 742300B 20 25 90 35 2 Yes
S 366M 742330B 23 29 22 38 5 Yes
S 313M 742350B 25 28 25 35 2 Yes
S 214M 742370B 25 30 27 40 2 Yes
S 215M 742360B 25 30 37 40 2 Yes
S 58AM 742380B 25 40 52 50 3.5 **Yes
S 58M 742390B 25 42 52 50 3 **No
S 527M 742395B 25 44 50 55 3 No
S 249M 742400B 28 52 89 76 4 **No
S 216M 742410B 30 35 37 45 2 Yes
S 58DM 742420B 30 40 52 50 3.5 **No

Product Code Suffixes

B = X-lube

N = Natural Nylon

AC = Acetal

ACGF = Glass Filled Acetal

Additional Information

These bushes have generally been designed with an interference fit on the OD to allow for a good push-fit into the housing. An additional clearance has also been allowed in the ID so that when the bush is installed, it will have the correct clearances for most applications.
It is important to check with LEP sales engineers if in doubt about the correct fitting and clearances of X-Lube® bushes. Other factors such as temperature variation, moisture absorption and bearing speed may mean additional clearance is necessary.
X-Lube® bushes are available in plain (P) or shouldered (S) configuration and are normally moulded in MoS2 filled nylon-6. However, other materials such as acetal can be supplied for specific applications, although minimum order quantities may apply.
Items marked * have a heavy-wall thickness and need to be machined to finished dimensions. This can be done in our well-equipped machine shops before delivery.
X-Lube® bushes are produced from special tooling developed by Mulford Engineering Plastics. This tooling is cost-effective and ideal for production of bushes for special requirements.

Related Products